Ivy is a ready to run mobile embedded platform. The fan-less and interactive human machine interface (HMI) positions this platform for industrial environments where flexibility and agility are critical. Modernize future workforces by equipping them with mobile devices capable of general packet radio service (GPRS), extended battery life, and hardware based voice/video over IP (VOIP).Design and verify your applications right on the Ivy prior to deployment to the field. Picoway’s Ivy speeds up product time-to-market and reduces overall development costs.
Suitable For
Mobile Terminals Vehicle PC Fleet Management
Features
Freescale ARM11 i.MX31 with core frequency up to 532MHz 128MB SDRAM, 1GB NAND Flash, 4MB NOR Flash SD Card slot for on board storage 7” LCD Display, 800x480, 18/24 bit color (Optional up to 12.1” SVGA
LCD Display) Touch Panel Resistive Type Advanced Power management with suspend/normal mode Low Power consumption Li-Ion rechargeable Battery operation enabling mobile application USB 2.0 Host/OTG RS232/RS485 Audio In/Out On-board Video Decoder Optional CMOS Camera Senor Optional RFID Scanner Optional Barcode Scanner Optional GPRS Module Network enabled telemetry support Linux/ Windows CE 6.0 support Board Support Packages (BSP) for development
Specification
General
CPU
i.MX31 ARM11 532MHz Core
Volatile Memory
Volatile Memory 128MB DDR SDRAM
Non-Volatile Memory
4 MB NOR Flash
Storage
1GB NAND Flash (Optional 128MB)
Expandable Memory
1 x SD / CF Interface Port
Display
Panel Size
7" TFT LCD
Resolution
800 x 480
Ethernet
1 x RJ45 (DM9003)
I/O
USB 2.0
1 x USB 2.0 / OTG / HS
1 x USB 2.0 / Host / FS
1 x USB 2.0 / FS
Serial
1 x RS323
1 x RS422 / 485
1 x SPI
1 x IIC
Video In
1 x Video In
Audio In
1 x Line In
1 x MIC In
Audio Out
1 x Speaker
1 x Headphone
1 x D Amp
HMI
1 x Keypad Input
1 x 4/5 Wire Resistive Touch Panel
JTAG
1 x Connector
Slot
1 x miniSD
1 x RTC Battery
GPIO
5 x GPI, 4 x GPO
Power
Power Input Voltage
12V - 24V
Battery
1 x 4Cell 2 Cell Li-Ion, 1 x Conection Battery Charger
Mobile Terminals